• Page 11 of Industrial News about Flange Industry
Tel: 86-592-5204188
Fax: 86-592-5204189
[email protected]
Industry News
121-132 of 167 results

An incident of toxic chemical spill due to flange gaskets breakage

  • Posted: November 12, 2018
  • Hits: 179
On November 4th, People in Quangang (a district in Quanzhou, Fujian Province) were jarred by an odor permeating in the air that spread from the area of Shangxi Village, Houlong Town and Fengqian Village, Fengwei Town. At the same time, parts of the sea were contaminated by a tawny oil-like leakage....

12 kinds of flanges (part two)

  • Posted: November 1, 2018
  • Hits: 113
Blind Flange It is a flange without any bore in the middle in order to block off media through a pipeline, like what welded cap and casing cap function, except that only casing cap and blind flange are able to be uninstalled at any time. Blind Flange with Anti-Corrosion Lining It is a kind of blind...

12 kinds of flanges (part one)

  • Posted: October 27, 2018
  • Hits: 111
As a kind of indispensable spare part in piping design, flanges can be used in a wide range of fields, such as industrial furnace, water supply and drainage, heating and ventilation. Materials: Forged steel, WCB carbon steel, stainless steel, 316L, 316, 304L, 304, 321, Cr-Mo steel, Cr-Mo-V steel, 316Ti,...

The Shanghai International Pipe Flange and Pipeline Exhibition 2018

  • Posted: June 4, 2018
  • Hits: 65
Information of the exhibition Exhibition Name: The Shanghai International Pipe Flange and Pipeline Exhibition 2018 Date: November 1-3, 2018 Venue: Shanghai New International Expo Center The overview of the exhibition The Shanghai International Pipe Flange and Pipeline Exhibition (Shanghai Pipe...

An Introduction to Large Diameter Carbon Steel Flanges

  • Posted: October 17, 2017
  • Hits: 81
There are some perforations bolts can go through on large diameter carbon steel flanges, and the bolts can make two flanges tightly connected with each other. Flanges are sealed through the gaskets. When the sizes of large diameter carbon steel flanges need to be determined, the nominal diameter as...

What Is the Lap Joint Flange with Welding Neck Collar?

  • Posted: September 18, 2017
  • Hits: 374
Lap joint flanges can be mainly divided into four types: loose plate steel pipe flanges with weld-on collar, loose plate steel pipe flanges with welding neck collar, lap joint flanges with welding neck collar and lap joint flanges with welding neck collar. The roles of lap joint flanges Lap joint...

The Differences Between Forged Flanges and Cast Flanges

  • Posted: September 5, 2017
  • Hits: 74
Cast flanges can be manufactured in various kinds of complex shapes which are difficult to be obtained for the flanges which are produced by other manufacturing methods. Cast flanges have very low costs, which make them much cheaper than forged flanges. They have characteristics of the ideal surface's...

Analyses on Export of China's Flanges to the EU and the US (Part Two)

  • Posted: August 14, 2017
  • Hits: 73
2. The total weight of exported China's steel flanges The total weight of China's steel flanges exported to the United States, the United Kingdom, the European Union and the major countries in the EU since 2012 is shown in Figure 2 and Figure 3. The data all come from the...

Analyses on Export of China's Flanges to the EU and the US (Part One)

  • Posted: August 1, 2017
  • Hits: 72
1. An introduction 1.1 The definition of the flange Flanges are spare parts between two shafts to connect tube ends. Flanges such as reducer flanges are also used for inlets and outlets of facilities to connect two facilities. The flange connection or the flange joint refers to a set of detachable...

How to Prevent the Flange Seal from Losing Efficacy at High Temperatures?

  • Posted: July 18, 2017
  • Hits: 44
How to prevent the flange seal from losing efficacy at high temperatures? Here are some suggestions listed as follows. 1. Set the insulation lining or ring on the inside of the gasket and the flange to change the heat condition of the flange, the bolt as well as the gasket, to reduce...

Development History and Performance of Stainless Steel Flanges

  • Posted: June 23, 2017
  • Hits: 147
Originated in the 1980s and after more than 20 years' development and exploration, the stainless steel flange industry begins to take shape at present. The stainless steel flange is a kind of pipe fitting and is mainly made of stainless steel material. With the development...

Advantages of Large Flanges

  • Posted: June 10, 2017
  • Hits: 83
Large flanges not only have different use values, effects and functions when used, but also have various materials, production processes and processing methods. Thus, we have to pay special attention to the methods of both processing and utilizing large flanges. Common large flanges...

Total 167 Records, 12 records per page