• Page 9 of Industrial News about Flange Industry
Tel: 86-592-5204188
Fax: 86-592-5204189
[email protected]
Industry News
97-108 of 167 results

Operational Norms of Forged Flanges

  • Posted: September 28, 2020
  • Hits: 52
In the production of forged flanges, it is often necessary to heat the flange blank at high temperature and then forge it by a hammer. Through constant blows, the density of the flange blank is continuously increased. And then the flange is produced by shaping and drilling. There are certain risks...

Knowledge of a Lap Joint Flange

  • Posted: September 9, 2020
  • Hits: 61
What is a Lap Joint Flange/Loose Flange? A lap joint flange is used to cover the end of a pipe with flanging, the steel ring and other processes. The steel ring or flanging is a sealing surface, and the function of a flange is to press them tightly. It can be seen that the lap joint...

What Are Three Methods for Local Repair of Flanges

  • Posted: August 29, 2020
  • Hits: 161
The application of flange plays an important role in many aspects, including petrochemical industry, energy industry, scientific research and military industry. However, in the reactor of refinery, the production environment of flange is very bad, and the performance of flange must be excellent, because...

How to Identify the Authenticity of Stainless Steel Flange

  • Posted: August 15, 2020
  • Hits: 41
Nitric acid spot test: A notable feature of stainless steel flanges is inherent corrosion resistance to concentrated nitric acid and dilute nitric acid. This property makes it easy to distinguish from most other metals or alloys. 1. Copper sulfate spot test: Copper sulfate point test is the simplest...

Process and Quality of Welded Flanges

  • Posted: June 27, 2020
  • Hits: 71
A flange is used for attachment to another object, for instance, the end of a pipe. It can also be used for connection between two equipments, e.g. reducer flange, which is used for connection between the motor and the reducer, as well as the reducer and other equipment. According...

Common problems in flange use

  • Posted: June 19, 2020
  • Hits: 61
During flange casting, the liquid metal is filled with a mold and solidified while rotating. The flange casting has the following characteristics: liquid metal can form a freely selected hollow cylindrical surface in the mold, so that hollow castings can be cast without a core, thereby greatly simplifying...

How to choose the materials of stainless steel flanges

  • Posted: May 13, 2020
  • Hits: 68
Flange is a disc-shaped connecting part that is connected between pipe ends and closed at the same time. It is the most common in pipeline engineering, such as the connection of ventilation pipes. Flange materials include carbon steel, low alloy steel and stainless steel. Among them, stainless steel...

How to choose the right gasket for design process engineers reference

  • Posted: October 12, 2019
  • Hits: 182
Gasket seals are the most important type of static seals for detachable joints in pressure vessels, processing equipment, power machines and connecting pipes. They contain a wide range of fluid media, and preventing liquid or gas from leaking through these joints is the most important and difficult...

Production precautions of stainless steel flanges

  • Posted: May 17, 2019
  • Hits: 103
The pretightening force of the screw 1. It is suitable to increase the pre-tightening force and the sealing tightness of the gasket. (Reducing the capillary phenomenon of the permeable gasket material); 2. The pre-tightening force is evenly applied to the gasket -- the method of reducing the screw diameter...

Carbon steel flange buying guide

  • Posted: April 24, 2019
  • Hits: 113
A carbon steel butt weld flange refers to a flange with a neck that is butt welded to the pipe. It is a kind of disc-shaped part used in pairs, and the most common type of flange in piping work that is mainly used for the connection of pipelines. When installing, the two flanges are sealed and...

Things you need to know about steel crystallization

  • Posted: March 27, 2019
  • Hits: 406
By equipment such as furnace, converter, electric furnace, etc., steel is smelted and presented as liquid. In order to facilitate processing, it is cast in a mold of a certain shape and size, and after condensation, it constitutes a solid steel ingot and continuous casting billet. The continuous casting...

How to identify and choose flange gaskets - part two

  • Posted: March 25, 2019
  • Hits: 90
Metal jacketed gasket A metal jacketed gasket is a composite gasket composed of a non-metallic material as the core material and cut into the desired shape, and the outer is composed of a metal thin plate having a thickness of 0.25 mm to 0.5 mm. According to the state of the jacket, it is generally...

Total 167 Records, 12 records per page