• Page 2 of Industrial News about Flange Industry
Tel: 86-592-5204188
Fax: 86-592-5204189
[email protected]
Industry News
13-24 of 167 results

Pipe Flange Bolt Tightening in LNG Projects: Key Considerations

  • Posted: August 27, 2025
  • Hits: 382
Abstract: Using the LNG unloading pipeline at a receiving terminal as an example, this article examines the calculation of flange bolt preloading torque and the requirement for secondary tightening during the pipeline pre-cooling process. Applying a proper preload torque effectively prevents...

Ultrasonic Testing of High-Neck Flange Welds

  • Posted: August 27, 2025
  • Hits: 173
High-neck flanges used in enameled reactors are typically made from hot-rolled steel sections that are bent, welded, heat-formed, annealed, and finally machined. The steel grade used is 10 steel, and 422 welding rods are employed. To ensure weld quality, all high-neck flange welds must undergo...

Underwater Flange Connection Methods for Submarine Pipelines

  • Posted: May 27, 2025
  • Hits: 351
Abstract Underwater flange docking is an essential part of submarine pipeline installation. Improving the efficiency of this process is crucial for reducing the overall cost of submarine pipeline projects. This study examines flange docking methods under varying marine environments and conditions. It...

Key Technologies for Pressure Vessel Testing and Flange Connection Design

  • Posted: May 13, 2025
  • Hits: 185
Abstract Flanges are a common method used in assembling pressure vessels. Conducting in-depth research on the various types of flange joints and the key technologies involved in pressure testing is essential to ensure the safe and reliable operation of these vessels. This study examines the design,...

Installation of Main Bolts for Lap Joint Flange in High-Temperature Gas-Cooled Reactors

  • Posted: March 20, 2025
  • Hits: 72
Abstract This paper outlines the process for installing and positioning the main bolts on the lap joint flange of the hot gas duct in high-temperature gas-cooled reactors. By utilizing precise installation techniques and specialized positioning tools, we ensure accurate alignment of the main bolts...

Structural Design and Finite Element Analysis of Anchor Flanges

  • Posted: March 20, 2025
  • Hits: 98
Abstract Anchor flanges are essential components in large-diameter, high-pressure, long-distance gas and oil pipeline systems, operating under complex conditions. This study employs the finite element method for the structural design and analysis of a specific anchor flange, integrating production practices...

Key Welding Technology for High-Neck Flange and Steel Pipe Joints

  • Posted: January 28, 2025
  • Hits: 127
Abstract The core technology in steel pipe tower fabrication is the welding of high-neck flanges to steel pipes. An enhanced welding technique has developed, building on the original process. This new method not only ensures a high first-time pass rate but also improves production efficiency, facilitating...

The Design and Calculation of Stamped Lap Joint Flanges

  • Posted: January 8, 2025
  • Hits: 129
The Design and Calculation of Stamped Lap Joint Flanges This study introduces the steel stamped lap joint flange, a novel non-standard pipe flange, and examines the feasibility of applying the widely used Waters for its design and calculation. The analysis provides an outlook on the theoretical calculations...

Development of Manufacturing Large Anchor Flanges

  • Posted: December 24, 2024
  • Hits: 57
Abstract This paper examines the research, design principles, and production techniques for anchor flanges, which are vital support components in large-scale gas and oil pipelines operating under high pressure and spanning long distances. By prioritizing advanced and practical design principles, domestically...

Hardfacing the Inner Surface of Long-Neck Flanges Using CO₂ Gas-Shielded Welding

  • Posted: December 7, 2024
  • Hits: 91
Abstract A corrosion-resistant stainless steel layer is applied to the inner surface of the long weld neck flange on pressure vessels to enhance its resistance to corrosion. This paper discusses the application of CO₂ gas-shielded welding with stainless steel core wire and appropriate welding auxiliary...

UHV High-Neck Flange Welding

  • Posted: November 27, 2024
  • Hits: 187
3. Requirements for Welding Seams of Circumferential Butt Joint of UHV High-Neck Flanges During the production of steel pipe towers for UHV transmission lines, the welding of steel pipes to high-neck flanges is critical to the quality and progress of the entire project. Therefore, when dealing...

Application of High-Neck Flange to UHV Steel Pipe Tower

  • Posted: November 5, 2024
  • Hits: 58
The high-neck flange, also known as a long-neck flange or neck flange, is a disc-shaped component primarily used to connect pipes. It has been widely applied in petrochemical, urban water supply, and power systems. In recent years, with the planning and construction of the UHV transmission line project...

Total 167 Records, 12 records per page